Description: Simple operation, repair the dent quickly. Paintless repairing, does not damage the original paint. Pls refer as below: 1. The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent. 2. Big dent needs slide hammer or puller. Small dent needs mini dent lifter or pulling bridge. 3. Use different size glue tabs to different dent. 4. Use hot melt glue gun preheating a few minutes and smear hot glue on the glue tabs and stick on the core of dent. 5. Wait for 5-15 minutes (it depends room temperature) and pull it by hand make sure the tabs are strong stick on surface. 6. Use a slide hammer or dent lifter or any pulling tools lift the dent, try many times. 7. Drop glue remover or straight alcohol on the glues between tabs and car, remove the tabs and glue. 8. Check the surface if there still has a dent, use a suitable tabs and repeat 9. The above process.(it could use a line board to check, but experienced users could use it very well) When there is a bulge (over lift caused), use a tap down tool. Please tap lightly, or it will damage the car. Please note: If you are a new user, please take care of the first time and purchase a PDR kit. If only buy one tool, it is not enough. Specifications: Materials: Aluminium Alloy + Plastic T-Bar Color: Gold/Hermosa Pink/Black/Red/Blue Puller Tabs Color: Blue T-Bar Size: 10x9.5cm/3.94x3.74" More Detailed Size Pls see the picture Quantity: 1 Set Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. Due to the different display and different light, the picture may not reflect the actual color of the item. Thank you! No Retail Package Package Includes: 1 x T-Bar 10 x Puller Tabs