Features:  - A special alloy hammer crushing technology, ordinary garbage can of food waste processor on the crushing disk alloy hammer, the hammer, cutting, tearing and grinding four movements crushed garbage, garbage can according to the strength, automatically adjust the working position. In addition to metal, stone, ceramics, glass and other hard objects of non kitchen waste, the general garbage can be handled.  - Grinding wheel, grinding wheel adds two reinforcing ribs and a reinforcing strip, improving wear resistance of the grinding disc, unique function crushed, so that all waste to special grinding fineness, users never worry for pipeline blockage After grinding, coarse and fine of two kinds of automatic garbage separation through the filter holes, into a slurry of fine waste flowing into a liquid inflow pipe; coarse waste will stop to smash on the cutter disc, forming powder, with the water inflow pipeline. One work for more than ten seconds. - Lower noise by crushing grinding disc. Equilibrium point of the alloy, with a good balance of performance and stability, low motor noise, anti vibration ability.  - Set up a motor overload protection overload protection system, a foreign body stuck, protection system will start to stop the electrical power supply and not to burn out the motor, if the motor is in protection state, need to remove hard object stuck off garbage processor, and then press the reset button in front can be fast and convenient   - Food waste processor adopts switch. Anti leakage, improve the safety performance.  - Easy to install: Simple and convenient, through the installation of visual screen, a look will be, 5 minutes to get, without professionals.    Specification:  Milling chamber material: High density alloy;  Speed: 2600r / MIN;  Rated frequency: 50Hz / 60Hz;  Color: As shown;  Rated power: 370W;  Authentication: CE;  Installation system: Three-point loop;  Rated voltage: 220V;  Water outlet diameter: 90mm;    Package Included:  1 x Waste disposal;  1 x English manual