Feature:1. The electric drill can be used as a screwdriver and a percussion drill, and can be used to drill holes or remove screws.2. The electric drill has 18 torsion adjustments, which can be freely manipulated according to requirements, and it is more practical.3. There is a CVT switch, which supports twospeed adjustment and CW and CCW rotation, the drilling is flexible and good for heat dissipation.4. The torsion can up to 22Nm, the rated speed can up to 1200rpm, and the drilling efficiency is high.5. The electric drill has a compact structure, a pistolgrip straight handle is easier to hold, and the drill chuck can work in a narrow area.Specification:Item Type: Electric DrillType: CW and CCW drillNo-Load Speed: 2000rpmPower Supply: Rechargeable-lithium battery technologyBattery: Rechargeable lithium battery, 1800mAhPower Supply Voltage: AC100-240VWorking Voltage: 21VRated Output Power: 200WRated Torsion: 22NmElectric Drill Structure: Pistol typeSpeed Regulation: 2-speedDrill Bit Clamping Method: Drill chuckHandle Structure: Rear straight handleUsing Time: About 150 minutesApplication: Screw drilling, unloading nuts, drilling woodChuck Diameter: Approx. 12mm / 0.5inMaximum Drill Diameter: Approx. 10mm / 0.4inRated Speed: 1200rpmWood Drilling: Approx. 20mm / 0.8inAluminum Drilling: Approx. 20mm / 0.8inSteel Drilling: Approx. 12mm / 0.5inAccessories: Two battery one charging battery box.Package List:1 x Electric Drill2 x Battery Box1 x Adapter1 x User ManualNote:1. When operating, the operator should pay attention to whether the accessories are intact, whether the insulated cable is damaged, whether there is aging, etc. After the inspection, plug in the power source before proceeding.2. During cutting and grinding operations, there should be no people and explosives within one meter around, and do not work in the direction of people to prevent casualties.3. When the grinding wheel is used up and needs to be replaced, the power supply must be cut off to replace it, in case the switch is pressed accidentally, causing unnecessary personnel accidents.4. When working with dangerous and flammable materials, more than two fire extinguishers must be equipped to prevent problems. Achieve the principle of safety first and production second.5. If you use it after a long period of 30 minutes, you should stop resting for more than 20 minutes, and work after it cools down. To prevent the temperature from being too high during long‑term use, which is easy to damage and cause industrial accidents.6. When in use, we must use it in accordance with the use specifications and instructions, and perform regular inspections, maintenance, and ensure that the work is in good condition to reduce the occurrence of accidents.