Electric heating wood strip bender This bender uses a 936 series soldering iron to heat the bender. After the wooden strips of the hull are soaked in water, they pass through the groove on the top, and the wooden strips are slowly approached to the bender. The water in the wood fibers is heated by the heat of the bender to soften the wood fibers. It can achieve the effect of bending the wooden strips, and the wooden strips can be dried, and can be used directly after bending, which is convenient and quick. Features: 1. The main body of the bender is made of non-standard aluminum alloy, which is not easy to be oxidized. 2. The connecting shaft is made of brass, which conducts heat quickly. 3. Rotate the positioning ring to easily adjust the curvature of the bend. 4. The width of the groove can be adjusted, suitable for wooden strips of different thicknesses. 5. The curved main body and positioning ring are fixed with white steel locking screws, which is not easy to rust. 6. The connecting rod adopts the special connecting rod of 936 series soldering iron, which is convenient to replace various heating heads and has stronger applicability. 7. You can choose a mini iron, which solves the problem of slow speed and easy curling of latex glued to the hull. Package included: 1 x Bender Or 1 x 60W digital temperature regulating soldering iron Set